| ENGINEERED FOR ELECTRICAL EXCELLENCE |
| Electromag has engineered a unique design to avoid low frequency build up and maintain a flat response up to 20 kHz. This is illustrated by the frequency response curves below which are taken using an Otari MTR 90 II with 2 3/4 db overbias at 10 kHz on Zonal 700 tape. These curves demonstrate the perfectly flat frequency response and low total harmonic distortion that EMC heads can bring to your studio. Ask for a demonstration on your own studio equipment. |
 |
||||||
 ENGINEERED FOR EXTRA LONG LIFEElectromag has a patented manufacturing process that uses ceramic materials as the bonding agent between each layer of magnetic metal in place of the epoxy used in standard soft faced heads. The long wearing ceramic material is engineered to produce a core that is stress free and displays the ideal magnetic properties of the virgin magnetic material used to design audio recording systems. As shown in the illustration, the tape travels across the head parallel to the laminations and wears the softer magnetic material down 3 to 10 microinches. This leaves the ceramic slightly higher which provides a long wearing surface for the magnetic tape to ride on throughout the life of the head. The 10 microinch separation loss is negligible at audio wavelengths.
|
||||||
|
INSTALL EMC HEADS AND EXPERIENCE THE LONG LIFE,
ELECTRICAL EXCELLENCE |
||||||
|
||||||
| Download a printable PDF of this page. | ||||||
|
||||||
|
